CSL - Coast Freshe Cold Plunge How to Set Your Temperature

Cold-only models:

To control the temperature of standard cold plunge models, hold down the set button on the chiller until it beeps, lower it to the temperature you desire, and then hit the set button again to take us back to the current temperature of the water. Make sure the green switch is on, on the side of the chiller. 

Hot/Cold models:

To control the temperature of your Coast Freshe Hot Soak you will use the chiller unit's thermostat on the back of the Plunge, while leaving your chiller temperature at 108 degrees Fahrenheit. 

Your Coast Freshe Cold Plunge or Coast Freshe Hot Soak can be controlled manually or remotely through TUYA app. Control your chiller unit inside using Wi-Fi. Any smartphone can be connected and is accessible by the TUYA app. Click here to see a video on How To connect to your chiller unit inside using TUYA app.